How to Set up the D-Link DAP-1520 through dlinkap.local?

How to Set up the D-Link DAP-1520 through dlinkap.local?

Even with the advancement in routers, users face dead spots on their premises. Some wifi routers are not built to provide unmatched Wi-Fi performance. D-Link’s DAP-1520 Wi-Fi range extender provides excellent Wi-Fi throughput across your large home. The DAP 1520 is a plug-n-play device that comes with an easy setup process. The process of the D-Link DAP-1520 setup is done through dlinkap.local or with QRS mobile app.

How-to-Set-up-the-D-Link-DAP-1520-through-dlinkap1

In this blog, you will learn how to configure the Dlink wifi range extender. Moreover, if you face any issues during the configuration like the dlinkap.local not working, you can fix those problems with the troubleshooting tips provided in this post.

Quick Instructions to perform the D-Link DAP-1520 setup

Set up the Dlink range extender to increase the coverage of your home network. You have the choice of setting up this extender with the QRS app or via http://dlinkap.local. Alternatively, you can configure it with the push of the WPS button. Keep reading the post to learn each method for setting up your D-Link wifi extender.

Configuring the extender using the WPS-push button

  • Firstly, place the DAP 1520 next to your home router and plug it into the power source. The extender’s power LED will turn Amber.
  • Now, locate the WPS button on the router and press it for about 4-5 seconds.
  • Make sure that the router is on during the configuration.
  • Next, locate and press the WPS button on the Dlink device.
  • The process will take hardly two minutes to complete.
  • Connect the extender to a wall outlet with the power adapter.
  • Now, use an Ethernet cable and connect it from the Dlink extender to your existing router.
  • Then connect your PC to the dlink DAP device either through Ethernet or wirelessly.
  • Afterward, navigate to the PC and open your default browser.
  • Next, type http://dlinkap.local in the browser’s address field and press the Enter button.
  • If you see the dlinkap.local not working error on the computer’s screen, use the extender’s default IP address.
  • Enter the Dlink’s default username and password as admin. Press Login.
  • Now, click on the Quick Setup Wizard. These wizards will assist you to perform the Wi-Fi network setup.
  • Click on the Set up the Network Manually option and click Next.
  • And, select the network name that you want to extend and enter the password to establish the wireless connection.
  • The D-Link DAP-1520 will rebroadcast the Wi-Fi signals from your router as an extended network.
  • Next, you would be prompted to change the SSID name and password.
  • Change the credentials for the extended network and click Apply.
  • The setup and configuration are now complete. Review all the Dlink extender settings and save them.

Is dlinkap.local not working? Follow the troubleshooting tips below.

  • First, make sure the Dlink extender is connected to the router with an Ethernet cable.
  • And, check the connections between the DAP extender and your PC.
  • Next, check the default web address you are typing in your browser is correct.
  • Try to close your current browser and use a different one to access the dlinkap.local login page.
  • If nothing works, reset the DLink DAP to the factory defaults.

Conclusion

Setting up the D-Link wifi range extender is quick using the steps mentioned above. If you have more queries, you can ask our technical experts. Dial our helpline number to know how to reset your dlink DAP 1520. For further assistance, you can do a live chat with our expert team.