When looking to configure your D-Link DAP1950 AC1900 Mesh WiFi Range Extender, there is a whole list of steps to follow. These range from unboxing the router to connecting it to installing and then configuring the network settings so you can use the network wisely. If you are looking for help with the D-Link DAP1950 AC1900 Mesh WiFi Extender setup, this blog is what you need to read.
Once set up, you will need not to deal with dead zones and weak signals. You can extend your home network signals, and expand your online experience. In this comprehensive guide, we will walk you through the setup and configuration process, ensuring a seamless installation and optimal performance.
Unboxing and Initial Setup
When you unbox the D-Link DAP 1950 AC1900 Mesh Wi-Fi Range Extender Setup, you will find the following items that you can use to configure your setup:
- The d’link dap 1950 setup
- Power adapter
- Ethernet cable
- Quick Installation Guide
Once you have checked the availability of these items, here are some preparatory steps you can follow:
- Choose an ideal location for the range extender, preferably midway between your router and the areas with weak Wi-Fi coverage. This will ensure better signal reception and distribution.
- Connect the range extender to a power outlet using the provided power adapter. Wait for the LED indicator to stabilize.
Connecting to the D’link DAP 1950 setup
Now, you can connect your range extender to the laptop/desktop or mobile device using a wired or wireless connection easily. Here are some steps you can follow:
Wireless Connection
- Using your computer or mobile device, go to the Wi-Fi settings and locate the network named “D-Link-Range-Extender.”
- Connect to it and enter the default Wi-Fi password (available in the Quick Installation Guide).
Wired Connection
- You can now connect your computer or device to the range extender using the provided Ethernet cable.
- Plug one end into the range extender’s Ethernet port and the other end into your computer’s Ethernet port.
Accessing the Dlinkap.local Login Page
- Open a web browser of your choice and type “http://dlinkap.local” in the address bar. This will take you to the D-Link extender’s login page.
- On the login page, enter the default username and password details to access the d’link dap 1950 setup interface. You can find these details in the Quick Installation Guide that comes with the setup wizard.
D-link DAP1950 Setup Process
- Once logged in, the Quick Setup Wizard will guide you through the configuration process step by step.
- You can follow the on-screen instructions, which include selecting your Wi-Fi network and entering its password. You can also customize the network name (SSID) and password for the extended network.
- For more advanced settings, navigate to the admin panel and explore the various options available.
- You can adjust security settings on this page and work to manage connected devices and configure parental controls, like settings.
Troubleshooting D-Link DAP1950 Setup Issues
- Issues during the setup process are evident. If you want to start fresh, you can reset the range extender to its factory default settings. To do that, locate the reset button on the device, usually found on the side or back. You can use a paperclip or a thin pin to press and hold the button for about 10 seconds until the LED indicators flash.
- If you experience connectivity problems, ensure you are within range of the range extender. Check if you entered the correct Wi-Fi password during the setup process. Additionally, verify that your router’s firmware is up to date and that the range extender’s firmware is the latest version available on the D-Link website.
- The WiFi coverage can also cause issues with the network. If you find that the extended Wi-Fi signal is still weak in certain areas, try repositioning the range extender closer to those areas. Experiment with different locations until you achieve the desired coverage.
The final word
You can easily set up and configure your D-Link DAP 1950 AC1900 Mesh Wi-Fi Range Extender effortlessly. With all the advanced features and reliable performance, you can enjoy a seamless and extended Wi-Fi connection throughout your home or office. However, ensure that you keep the range extender firmware up to date. If you face any issues with the d’link dap 1950 setup process, you can always refer to the troubleshooting steps as discussed here.
FAQs
You can connect your D-Link Extender to the WiFi network using the general setup process. There are two ways to do that- wired and wireless.
For wired connection, you can connect the devices using ethernet cables. Connect your router to the extender directly at the LAN ports. You will see the LAN LED light up when the connection is successful.
For a wireless connection, you can use the WiFi credentials to connect to the router network. You will need the username and the password details to connect the devices.
As discussed, you can use the Wired or Wireless connection method to connect your d’link dap 1950 setup to your main router. This will not require you to use the WPS connection at all, and you can connect the devices easily.
There can be many reasons why your D-Link DAP router is not working. Below are some troubleshooting steps you can follow for a resolution:
Make sure that the extender is properly connected to a power source and turned on.
Check if you are within range of the extender’s Wi-Fi signal.
Verify that you have followed the setup instructions correctly, including entering the correct Wi-Fi password during configuration.
Make sure that your router is operating properly and that the firmware version is up to date.
Try restarting both your router and extender and ensuring that the devices are working.
You can reset your D-Link WiFi extender using the RESET button located on the device. You can find it either on the bottom or the side panel of the extender. Once you have access to the same, you can use it to reset your extender. Press and hold the same for about 10 seconds and the lights will flash, indicating that the reset process is now over.