D-link Powerline Wifi Adapter AC1200 (COVR-P2502-US)

D-Link’s AC1200 powerline adapter is an excellent choice if you want to expand your wireless network. D’link wifi adapter delivers combining AC1200 Wi-Fi speeds up to 1300 Mbps, perfect for 4K streaming and online gaming. D-Link AC1200 Covr whole home powerline wifi system responds to the need for speed in large homes. The D-Link powerline adapter setup is simple and clean with the D-Link wifi app. With a unique hybrid technology, it gives you WiFi coverage that is more robust and scalable. You can get more information about this product by reading the AC1200 WiFi adapter review online. 

In this article, you will find easy steps to accomplish the D-Link Covr-P2502 setup along with the D’link WiFi Adapter AC1200 login

How to perform the D’Link powerline adapter setup?

The d-link AC1200 adapter comes with a set of two Covr points that you can set up for exceeding the wifi coverage. Setting up the D’link wifi adapter requires no networking experience or technical knowledge. The D-Link Covr-P2502 setup process requires you to plug one adapter into your router with an Ethernet cable and another adapter into a computer system that has an Ethernet port. And, then plug both the wifi adapters into the power source. You can refer to the D-link AC1200 wifi adapter manual to know more about this product.

Getting started with the hardware installation 

• Use a web-based user interface to manually set up or configure the D’link wifi adapter.
• Firstly, place one of the Covr-P2502 adapters closer to your home router.
• Connect one end of the included Ethernet cable to the LAN port on the Dlink adapter.
• Then connect another end of the Ethernet cable to the router’s LAN port.
• Now, plug in the adapter to the nearby power source.
• The power and LAN LED lights will lit up solid green.
• Afterward, plug the second Covr P2502 extender into an electrical outlet and power it on.
• The d-link ac1200 powerline adapters are now ready for configuration.

D-link COVR-P2502 setup via a web-based method

There are different ways to configure your adapter and connect it to the network. You can access the D’Link Setup wizard using the d’link AC1200 IP address. All you need to access D’link WiFi Adapter AC1200 login to launch these setup wizards.

• Make sure that your Covr P2502 is connected to the home network using the Ethernet cable.
• Now, connect your dlink extender to the computer system using the Ethernet wire.
• Open your default browser and type http://covr.local./ in its address field.
• You can also use the d’link AC1200 IP address to open the setup wizard screen.
• Next, these wizards will walk you through the entire setup and configuration process step-by-step. 

Use the D-Link WiFi app to perform the d’link powerline adapter setup

D-Link wifi app is another way to install and configure your Covr P2502 whole home powerline system. Follow the steps below to learn how to set up your adapter:

• The first step is to get the D-Link app. For that, browse the Play Store or App Store on your Smartphone.
• Now, launch the application and tap on Install a new device.
• Next, select Covr-P2502 from the list of devices and click Next.
• After that, you need to create a new network.
• Click on Create a network and then tap on Next.
• Follow the in-app instructions step by step for setting up the dlink adapter. 

D-Link Covr-P2502 setup with WPS button

WPS system is designed for easy and quick setup of Wi-FI networks. PLace your adapter closer to the router or access point during the installation process. 

• Firstly, unbox the product and install the antennas. 
• Plug in the dlink adapter to a power source and turn it on.
• Now, press the WPS button on the D’Link wifi adapter.
• HOld the WPS button for about 5 seconds until the wizard screen appears.
• Next, press the WPS button located on your router for 2 seconds.
• With this, your network connection is successfully established. 

Troubleshoot the D’link WiFi Adapter AC1200 login issues

You may face a lot of issues like d-link ac1200 not working, adapter not connecting to wifi, overheating issues, or many more. One of the common issues you may face with the D-Link powerline adapter is the login issue. Here are a few troubleshooting tips to fix the d’link powerline adapter setup and login problems.

• Verify if your Dlink power adapter is connecting to the Wi-Fi network. 
• Make sure your adapter is connecting to the existing router using the Ethernet cable.
• Try changing the frequency band settings of the powerline adapter.
• Also, update the adapter drivers to the latest version.
• Try to enter the correct d’link AC1200 IP address in the browser’s address field.
• Look for the correct login details in the D-link AC1200 wifi adapter manual.
• Restart the whole home powerline system and your router.
•  Try to update the Dlink adapter’s firmware to the advanced version.
• If nothing works, reset the adapter D’link to the factory defaults. 
• To know how to reset the Ac1200 powerline adapter, dial our helpline number. 

How to download and update the D-Link whole home adapter firmware?

• For the Dlink adapter firmware update, navigate to your PC and search for the device manager.
• Then go to the settings and click on the Wireless settings.
• Next, select your device name and download the latest firmware for your adapter.
• Follow the on-screen instructions to update the dlink adapter’s firmware.

Conclusion

These were steps to perform the d’link powerline adapter setup and login. If you face any issues while doing the setup and configuration, you can contact our team of experts. Our technical team is always available to assist you with the problem associated with the powerline adapter. You can dial our toll-free number or do a live chat with us through an online chat window.