The D-Link range extender is among the finest WiFi extenders. This range extender will extend your existing router’s network and eliminate any dead zones in your house. However, with time it is common to face issues, such as the D-Link extender not working. Such problems are ordinary, and every networking device owner will experience them at least once. What’s more, if these issues are left unresolved for too long, they can cause permanent damage to the extender. Therefore, it’s essential to figure these issues out and troubleshoot them accordingly.
Besides, these issues will defeat the purpose of having a WiFi range extender. If the D-Link extender not working, it will not amplify your router’s network. Moreover, in such cases, you will not be able to access high-speed internet in all the rooms of your house or workplace. If you are facing issues with your D-Link extender as well, don’t worry! Today, we’ll discuss the D-Link extender not working matter along with its troubleshooting methods.
Reasons Your D-Link Extender May Not Be Working
There could be numerous issues that you could be facing with your D-Link extender. Some are as follows:
- Incorrect placement
- Power issues
- Outdated firmware
- Incorrect configuration
- Internal issues
Troubleshooting Steps to Fix D-Link Extender Not Working Issue
Now that we know the issue with your D-Link extender, we can troubleshoot it effectively. The troubleshooting methods are as follows:
Restarting the D-Link Extender
- To fix any minor glitch or bug with the D-Link extender, you can restart the extender.
- Initially, power Off the extender and then unplug it.
- After 5-10 seconds, you can power it back On.
- Now, you can reconnect your devices to the extender.
- Any issue with the extender should be gone now.
- After this, you can also restart the router as there could be an issue with it as well.
Check the Router and Extender Connection
- A very common reason for the router and extender not working is the poor connection between the router and the extender.
- You must ensure to set up the extender accurately with the router.’
- After the setup, you can relocate the extender and place it close to the dead zones.
- However, you also need to make sure that you place the extender inside the router’s range.
- If the extender is too far from the router, the connection will break, and then the extender cannot extend its network.
- Therefore, it’s very crucial to find the most suitable spot for the extender.
Upgrading the Extender’s Firmware
- Sometimes, due to outdated firmware, you could face the D-Link extender not working issue.
- Therefore, it’s imperative to always keep the extender up-to-date.
- Updating the firmware will eliminate any internal issues with the extender and might as well bring new features.
- To update the firmware, you must proceed with the Dlink extender login.
- You can use the dlinkap.local address or IP address to log into the extender.
- After logging in, click on ‘Management’ and then to the ‘Upgrade’ section.
- Now, you can either upgrade it manually or update it automatically.
- For the ‘Manual Upgrade’, you will need to download the file from the D-Link support page.
- Thereafter, upload it from the user interface.
- Additionally, for the ‘Automatic Upgrade’, click on the ‘Check for New Firmware’ option.
- After that, if the firmware is available, you can click on ‘Upload’ to upgrade it.
- The firmware upgrade is complete.
- Now, any issue with the router should be gone.
- While you’re at it, you can also upgrade the firmware of the router to eliminate issues with the router.
These are some basic troubleshooting methods to fix any minor issue with the extender.
Advanced Troubleshooting
Now that we know the minor troubleshooting methods for the extender. In this section, we’ll discuss when none of those methods work. If the issue persists, you can try these ways to resolve the problem;
Reconfiguring the Extender’s Settings
- The settings of the extender play an important role.
- Most of the time, due to incorrect configuration, the issue continues.
- After the connection between the router and the extender is successful, the extender takes on the router’s settings.
- It is significant for the router and the extender’s settings to match.
- Otherwise, it could result in serious issues.
- Therefore, ensure to configure the extender and the router accurately.
- You can proceed with the dlink extender login via the dlinkap.local address and configure it.
Performing a Factory Reset
- For major issues with the extender, you can reset it.
- The reset will eliminate any internal issues with the extender and make it as good as new.
- To begin with, locate the reset button on the extender.
- It’s usually on the back of the extender.
- Now, you need to press and hold the button for a few seconds.
- When the LED turns either green, blue, or orange, you can release the button.
- At last, you can reboot the extender to bring the reset into effect.
- Now you can set up the extender again as it will restore the factory default settings.
- You can also reset the router to troubleshoot any issue with it.
Conclusion
In this article, we covered the reasons for the D-Link extender not working. Afterward, we discussed the troubleshooting methods. Ensure to follow these steps carefully to get the extender back on track. If there are any other issues you are facing with your extender, you can reach out to our team for a solution.